|
|
Standard Basket Trees have two dowel lengths. The shorter 2 (or3) install in the top holes and the longer 3 (or 2) install in the bottom holes. Use a standard carpenter’s hammer and tap the dowels halfway into the holes, starting from the end with the small dowel pin. The dowel pin should be positioned at the top of the dowel to keep baskets from sliding off the ends.
If the hole is too tight, spraying silicone or other lubricants on the dowel will make the installation easier.
Install the dowel pin in the other end of the dowel after the dowel is centered in the post.
One of our main objectives at Bartlett Bench & Wire is to make doing business with us easier for your company. If you have any thoughts, comments or questions that you feel could assist us in achieving this objective, please feel free to let us know. Email us today!
|
Join Our Mailing List |
For Email Marketing you can trust
|
If you have any questions or comments concerning this site, please contact the webmaster. |
|
Copyright © 1998-2010 Bartlett Bench & Wire, Inc. All rights reserved. |